Glass-ceramic Information
Glass-ceramic materials share many properties with both glasses and ceramics. Glass-ceramics have an amorphous phase and one or more crystalline phases and are produced by a so called "controlled crystallization" in contrast to a spontaneous crystallization, which is usually not wanted in glass manufacturing. Glass-ceramics usually have between 30% [m/m]and 90% [m/m] crystallinity and yield an array of materials with interesting thermomechanical properties.
Glass-ceramics are mostly produced in two steps: First, a glass is formed by a glass manufacturing process. The glass is cooled down and is then reheated in a second step. In this heat treatment the glass partly crystallizes. In most cases so called nucleation agents are added to the base composition of the glass-ceramic. These nucleation agents aid and control the crystallization process. Because there is usually no pressing and sintering, glass-ceramics have, unlike sintered ceramics, no pores.
A wide variety of glass-ceramic systems exists, e.g. the Li2O x Al2O3 x nSiO2-System (LAS-System), the MgO x Al2O3 x nSiO2-System (MAS-System), the ZnO x Al2O3 x nSiO2-System (ZAS-System), glass-ceramics made of Lithium-Disilicate and machinable glass-ceramics with Phlogopite as basic system.
Contents |
LAS System
The commercially most important system is the Li2O x Al2O3 x nSiO2-System (LAS-System). The LAS-system mainly refers to a mix of lithium-, silicon-, and aluminum-oxides with additional components e.g. glass-phase forming agents such as Na2O, K2O and CaO and refining agents. As nucleation agents most commonly Zirconium(IV)-oxide in combination with Titanium(IV)-oxid is used. This important system was studied first and intensively by Hummel[1] and Smoke[2].
After crystallization the dominant crystal-phase in this type of glass-ceramic is a high-quartz solid solution (HQ s.s.). If the glass-ceramic is subjected to a more intense heat treatment, this HQ s.s. transforms into a Keatite-solid solution (K s.s., sometimes wrongly named as beta-spodumene). This transition is non-reversible and reconstructive, which means bonds in the crystal-lattice are broken and new arranged. However, these two crystal phases show a very similar structure as Li could show. [3].
The most interesting properties of these glass-ceramics are their thermomechanical properties. Glass-ceramic from the LAS-System is a mechanically strong material and can sustain repeated and quick temperature changes up to 800–1000 °C. The dominant crystalline phase of the LAS-glass-ceramics, HQ s.s., has a strong negative coefficient of thermal expansion (CTE), Keatite-solid solution as still a negative CTE but much higher than HQ s.s.. These negative CTE's of the crystal-phase contrasts with the positive CTE of the residual glass. Adjusting the proportion of these phases offers a wide range of possible CTE's in the finished composite. Mostly for today's applications a low or even zero CTE is desired. Also a negative CTE is possible, which means, in contrast to most materials when heated up, such a glass-ceramic contracts. At a certain point, generally between 60% [m/m] and 80% [m/m] crystallinity, the two coefficients balance such that the glass-ceramic as a whole has a thermal expansion coefficient that is very close to zero. Also, when an interface between material will be subject to thermal fatigue, glass-ceramics can be adjusted to match the coefficient of the material they will be bonded to.
Originally developed for use in the mirrors and mirror mounts of astronomical telescopes, LAS-glass-ceramics have become known and entered the domestic market through its use in glass-ceramic cooktops, as well as cookware and bakeware or as high performance reflectors for digital projectors.
Cooktops
Glass-ceramic from the LAS-System is a mechanically strong material and can sustain repeated and quick temperature changes. It is not, however, totally unbreakable. Because it is still a brittle material as glass and ceramics are, it can be broken. There have been instances where users reported damage to their cooktops when the surface was struck with a hard or blunt object (such as a can falling from above or other heavy items).
At the same time, it has a very low heat conduction coefficient and can be made nearly transparent (15–20% loss in a typical cooktop) for radiation in the infrared wavelengths.
In the visible range glass-ceramics can be transparent, translucent or opaque and even colored by coloring agents.
A glass-ceramic cooktopToday[update], there are two major types of electrical stoves with cooktops made of glass-ceramic:
- A glass-ceramic stove uses radiant heating coils or infrared halogen lamps as the heating elements. The surface of the glass-ceramic cooktop above the burner heats up, but the adjacent surface remains cool because of the low heat conduction coefficient of the material.
- An induction stove heats a metal pot's bottom directly through electromagnetic induction.
Some well-known brands of glass-ceramics are Ceran (cooktops), Eurokera (cooktop, stoves and fireplaces), Zerodur (telescope mirrors), or Macor. German manufacturer Schott introduced Zerodur in 1968, Ceran followed in 1971. Nippon Electric Glass of Japan is another worldwide manufacturer of glass ceramics, whose related products in this area include Firelite and Neoceram fire-rated glass.
The same class of material was also used, until the late 1990s, in Corningware dishes, which could be taken from the freezer directly to the oven with no risk of thermal shock.
It is interesting to note that this technology is not entirely new, as glass-ceramic ranges were first introduced in the 1970s using Corningware tops instead of the more durable material used today. These first generation smoothtops were problematic and could only be used with flat-bottomed cookware.[1]
Compared to conventional kitchen stoves, glass-ceramic cooktops are relatively simple to clean, due to their flat surface. However, glass-ceramic cooktops can be scratched very easily, so care must be taken not to slide the cooking pans over the surface. Food with a high sugar content (such as jam) should never be allowed to dry on the surface if it spills, otherwise damage will occur. Cleaning is best carried out by using a soft cloth along with a special glass-ceramic cleaner that applies a thin protective film on the glass. [2]
For best results, all cookware should be flat-bottomed with no warps or dents.
Source
- ^ Hummel F.A.: "Thermal expansion properties of some synthetic lithia minerals" Journal of the American Ceramic Society, 1951, Vol.34 (8), P. 235-239.
- ^ Smoke E. J.: "Ceramic compositions having negative linear thermal expansion" Journal or the American Ceramic Society, 1951, Vol.34, P. 87-90.
- ^ Li C.T.: "Transformation mechanism between high-quartz and keatite phases of LiAlSi2O6 composition" Acta Crystallica, 1971, Vol.27, P. 1132-1140.
Literature
- McMillan P.W., "The glass phase in glass-ceramics", Glass Technology, 1974, Vol. 15 (1), P. 5-15
- Bach H. (Editor), "Low thermal expansion glass ceramics", Springer-Verlag (1995).
- Holand, Wolfram and Beall, George H. Glass-Ceramic Technology. Wiley, 2002. ISBN 978-1-57498-107-0
Categories: Glass-ceramics | Ceramic materials | Glass engineering and science | Glass chemistry
|