Vapor-liquid Equilibrium Answers
how can i remove white candle wax from a black business pencil skirt?
Q. i specified the type of skirt so as to say that there are no ruffles, etc. which may hide this wax... i need to get out like every little bit, so hit me with your best suggestion! thanks =)
Asked by princess_kitty - Mon Jan 24 01:29:41 2011 - Cleaning & Laundry - 2 Answers - Comments
A. Freeze it then scrape off as much as possible. take the skirt put then stain over a bowel secure it with a rubber band then pour hot water over stain. The wax will melt through it. follow up by washing as usual.2. on small amount of hardened wax scrape off material See above. or apply generous amount of vegetable oil to harden wax after scraping. wipe off remove excess oil the wash as usual. 3). SCRAP as usual put stain between 2 paper towels. Using iron on low setting place on paper towel. Wax ill melt and be absorbed by towels. Repeat until all wax is gone. wash as usual. be careful not to over heat the material as it could damage it.
Answered by - Mon Jan 24 03:12:24 2011
Q. i specified the type of skirt so as to say that there are no ruffles, etc. which may hide this wax... i need to get out like every little bit, so hit me with your best suggestion! thanks =)
Asked by princess_kitty - Mon Jan 24 01:29:41 2011 - Cleaning & Laundry - 2 Answers - Comments
A. Freeze it then scrape off as much as possible. take the skirt put then stain over a bowel secure it with a rubber band then pour hot water over stain. The wax will melt through it. follow up by washing as usual.2. on small amount of hardened wax scrape off material See above. or apply generous amount of vegetable oil to harden wax after scraping. wipe off remove excess oil the wash as usual. 3). SCRAP as usual put stain between 2 paper towels. Using iron on low setting place on paper towel. Wax ill melt and be absorbed by towels. Repeat until all wax is gone. wash as usual. be careful not to over heat the material as it could damage it.
Answered by - Mon Jan 24 03:12:24 2011
Hello, would you mind telling me the meaning of: waxy and wax myrtle?
Q. Also, can you give me a couple of sentences please?
Asked by khnamna - Sat Feb 28 10:10:15 2009 - Words & Wordplay - 1 Answers - 1 Comments
A. Coveed with wax and violet.
Answered by V Y.. - Sat Feb 28 10:18:02 2009
Q. Also, can you give me a couple of sentences please?
Asked by khnamna - Sat Feb 28 10:10:15 2009 - Words & Wordplay - 1 Answers - 1 Comments
A. Coveed with wax and violet.
Answered by V Y.. - Sat Feb 28 10:18:02 2009
does candle wax burn as a solid, liquid, or a vapor?
Q.
Asked by cdha3 - Thu Sep 13 12:49:30 2007 - Chemistry - 2 Answers - Comments
A. A candle demonstrates the four states of matter. The four states of matter are Solid, Liquid, Gas, and Plasma. Wax, the fuel source of a candle goes through all four of these states of matter. When we light a candle. We need a catalyst to start the whole thing going, so we touch a flame to the end of the wick. At first the wick itself starts to burn. The flame creeps down the sides of the wick and usually diminishes until it touches the wax. This is when the mechanism starts to work. The heat from the flame melts the wax surrounding the base of the wick directly beneath it. By the principle of capillary action the melted wax is drawn into the wick providing fuel for the flame which bursts to life. The candle continues to burn through an… [cont.]
Answered by Lucy - Thu Sep 13 12:56:16 2007
Q.
Asked by cdha3 - Thu Sep 13 12:49:30 2007 - Chemistry - 2 Answers - Comments
A. A candle demonstrates the four states of matter. The four states of matter are Solid, Liquid, Gas, and Plasma. Wax, the fuel source of a candle goes through all four of these states of matter. When we light a candle. We need a catalyst to start the whole thing going, so we touch a flame to the end of the wick. At first the wick itself starts to burn. The flame creeps down the sides of the wick and usually diminishes until it touches the wax. This is when the mechanism starts to work. The heat from the flame melts the wax surrounding the base of the wick directly beneath it. By the principle of capillary action the melted wax is drawn into the wick providing fuel for the flame which bursts to life. The candle continues to burn through an… [cont.]
Answered by Lucy - Thu Sep 13 12:56:16 2007
Any help for making wax and gel aromatic designer candles for business purpose in Rohtak(HARYANA)?
Q. I want to start a small scale industry and found making designer candles interesting but don't know how to start,how much fund required and from where to get the raw materials..Any genuine help regarding this will be highly appreciated.
Asked by woodsnake - Fri Sep 5 08:56:25 2008 - Small Business - 2 Answers - Comments
A. Contact trade associations or to get offers from suppliers and manufacturers of candle material , send an email with your requirement to
Answered by Sat S - Mon Sep 8 23:17:25 2008
Q. I want to start a small scale industry and found making designer candles interesting but don't know how to start,how much fund required and from where to get the raw materials..Any genuine help regarding this will be highly appreciated.
Asked by woodsnake - Fri Sep 5 08:56:25 2008 - Small Business - 2 Answers - Comments
A. Contact trade associations or to get offers from suppliers and manufacturers of candle material , send an email with your requirement to
Answered by Sat S - Mon Sep 8 23:17:25 2008
Why is water a liquid at room temperature while wax is a solid?
Q. Water has hydrogen bonding which is significantly stronger than the London dispersion forces in wax, so why is wax a solid while water is liquid? Is it because the chain of wax molecule is long, so the London dispersion forces is increased many-folds, and becomes stronger than the hydrogen bonding?
Asked by EagleBoy - Thu Apr 1 10:34:10 2010 - Chemistry - 2 Answers - Comments
A. Yes, pretty much. The long wax molecule can experience the dispersion force over its entire length. Also, the long wax molecules can intertwine and twist together, which also forms some strengthening bond between them. That's the reason that wax is still pliable. Water molecules are small and don't experience such a large area bond, but they are also packed together more tightly in ice, explaining why ice is so hard and not pliable.
Answered by kumorifox - Thu Apr 1 10:39:10 2010
Q. Water has hydrogen bonding which is significantly stronger than the London dispersion forces in wax, so why is wax a solid while water is liquid? Is it because the chain of wax molecule is long, so the London dispersion forces is increased many-folds, and becomes stronger than the hydrogen bonding?
Asked by EagleBoy - Thu Apr 1 10:34:10 2010 - Chemistry - 2 Answers - Comments
A. Yes, pretty much. The long wax molecule can experience the dispersion force over its entire length. Also, the long wax molecules can intertwine and twist together, which also forms some strengthening bond between them. That's the reason that wax is still pliable. Water molecules are small and don't experience such a large area bond, but they are also packed together more tightly in ice, explaining why ice is so hard and not pliable.
Answered by kumorifox - Thu Apr 1 10:39:10 2010
How do I start a business installing Vapor Barrier's in basements etc?
Q. I'm trying to start a business installing vapor barrier's in basements for new and old homes and homes that are still under construction. I have the tools and material's. and a business license. What else do I need? What are ways that I can get customers?
Asked by Steven S - Thu Jul 10 15:28:31 2008 - Decorating & Remodeling - 2 Answers - Comments
A. Take out ads for you service. Get a web site up and running. Your would be surprised at much letting people know of your service will get you jobs. >Jim
Answered by jimmyrosenkoetter - Thu Jul 10 15:37:17 2008
Q. I'm trying to start a business installing vapor barrier's in basements for new and old homes and homes that are still under construction. I have the tools and material's. and a business license. What else do I need? What are ways that I can get customers?
Asked by Steven S - Thu Jul 10 15:28:31 2008 - Decorating & Remodeling - 2 Answers - Comments
A. Take out ads for you service. Get a web site up and running. Your would be surprised at much letting people know of your service will get you jobs. >Jim
Answered by jimmyrosenkoetter - Thu Jul 10 15:37:17 2008
Whats the difference between a paste car wax and liquid car wax?
Q. 1. Whats the difference between a paste car wax, and a liquid car wax( which come in a spray bottle). 2. Which one is better.
Asked by heheman1400 - Mon May 11 04:01:40 2009 - Maintenance & Repairs - 2 Answers - Comments
A. 1. theres 3 different types of waxes, paste, liquid, and spray wax paste, is generally harder to apply/remove, liquid is easier to apply/remove. spray wax is only used for touch ups, so after you wash your car, you use the spray wax, to keep it looking like the 'just waxed' look, its not a substitute for regular waxing 2. between paste and liquid, ive only used liquid, but thers no difference between them, just easier/harder, so liquid and both waxes need to be applied in shade pretty much everything you do to your car, its best to do in shade
Answered by KB - Mon May 11 13:01:33 2009
Q. 1. Whats the difference between a paste car wax, and a liquid car wax( which come in a spray bottle). 2. Which one is better.
Asked by heheman1400 - Mon May 11 04:01:40 2009 - Maintenance & Repairs - 2 Answers - Comments
A. 1. theres 3 different types of waxes, paste, liquid, and spray wax paste, is generally harder to apply/remove, liquid is easier to apply/remove. spray wax is only used for touch ups, so after you wash your car, you use the spray wax, to keep it looking like the 'just waxed' look, its not a substitute for regular waxing 2. between paste and liquid, ive only used liquid, but thers no difference between them, just easier/harder, so liquid and both waxes need to be applied in shade pretty much everything you do to your car, its best to do in shade
Answered by KB - Mon May 11 13:01:33 2009
What is the tax treatment for liquid corporate assets upon the end/retirement of a business?
Q. The business is a CCPC (Canadian-Controlled Private Corporation) and the owner will be ending the business due to retirement. There are some liquid corporate assets that exist within the corporation. Is the only option to cash out all the assets at once and take a huge tax hit, or may the owner keep the corporation running and take out liquid assets each year to cover living expenses (thus not taking as much of a tax hit)? Any links to information would be much appreciated.
Asked by sirish - Wed Feb 3 16:25:21 2010 - Canada - 1 Answers - Comments
A. Have a look at this article on the $750,000 lifetime capital gains tax exemption. This will certainly help you out.
Answered by Allan Accountant - Wed Feb 3 17:17:50 2010
Q. The business is a CCPC (Canadian-Controlled Private Corporation) and the owner will be ending the business due to retirement. There are some liquid corporate assets that exist within the corporation. Is the only option to cash out all the assets at once and take a huge tax hit, or may the owner keep the corporation running and take out liquid assets each year to cover living expenses (thus not taking as much of a tax hit)? Any links to information would be much appreciated.
Asked by sirish - Wed Feb 3 16:25:21 2010 - Canada - 1 Answers - Comments
A. Have a look at this article on the $750,000 lifetime capital gains tax exemption. This will certainly help you out.
Answered by Allan Accountant - Wed Feb 3 17:17:50 2010
What is the differences between using a liquid wax and spray wax besides the convenience?
Q. I know using spray wax is much easier than using liquid wax, but what are the differences between using a spray wax and a liquid wax besides the convenience
Asked by usmarinesinfantrypfc - Sun Oct 2 03:51:40 2011 - Maintenance & Repairs - 1 Answers - Comments
A. its the same thing only one comes in a bottle that sprays it :o
Answered by - Sun Oct 2 04:00:46 2011
Q. I know using spray wax is much easier than using liquid wax, but what are the differences between using a spray wax and a liquid wax besides the convenience
Asked by usmarinesinfantrypfc - Sun Oct 2 03:51:40 2011 - Maintenance & Repairs - 1 Answers - Comments
A. its the same thing only one comes in a bottle that sprays it :o
Answered by - Sun Oct 2 04:00:46 2011
How does a Materials Science and Engineering Ph D get into business world?
Q. Hi, I am a Materials Science and Engineering Ph D student in a prestigious university in US. But I really want to get into business world after Ph.D. I am kinda confused what to do? Can anyone give some suggestions, like what is the baby step to really get started this dream? What is the advantage of materials science and engineering major student to do that? What is the disadvantages?For an engineering background student, what is especially important and challenging for him to interview with a business examiner?Thanks, guys.
Asked by burnfat - Fri May 18 10:06:11 2007 - Technology - 5 Answers - Comments
A. There are a lot of industries that can use smart people, but most of them would not let you use your Ph D. An MBA might help, but you might want to talk to some adventure capitalists active in your field. (Check who has invested in some of the companies active in your industry). They would be looking for the combination of industry knowledge and business sense.
Answered by europeaninla - Fri May 18 10:14:07 2007
Q. Hi, I am a Materials Science and Engineering Ph D student in a prestigious university in US. But I really want to get into business world after Ph.D. I am kinda confused what to do? Can anyone give some suggestions, like what is the baby step to really get started this dream? What is the advantage of materials science and engineering major student to do that? What is the disadvantages?For an engineering background student, what is especially important and challenging for him to interview with a business examiner?Thanks, guys.
Asked by burnfat - Fri May 18 10:06:11 2007 - Technology - 5 Answers - Comments
A. There are a lot of industries that can use smart people, but most of them would not let you use your Ph D. An MBA might help, but you might want to talk to some adventure capitalists active in your field. (Check who has invested in some of the companies active in your industry). They would be looking for the combination of industry knowledge and business sense.
Answered by europeaninla - Fri May 18 10:14:07 2007
How do I know if I have wax in my ear or liquid?
Q. I can't seem to be able to tell, if theres wax in my right ear, or liquid since yesterday I put some ear wax removal but only once.
Asked by shy girl - Wed Apr 23 16:08:38 2008 - Other - Diseases - 2 Answers - Comments
A. If this doesn't resolve itself, purchase an ear syringe & attempt to flush the ear to clear it. If that isn't effective, you will need to have it flushed by the doctor...
Answered by olympics junkie - Wed Apr 23 18:25:19 2008
Q. I can't seem to be able to tell, if theres wax in my right ear, or liquid since yesterday I put some ear wax removal but only once.
Asked by shy girl - Wed Apr 23 16:08:38 2008 - Other - Diseases - 2 Answers - Comments
A. If this doesn't resolve itself, purchase an ear syringe & attempt to flush the ear to clear it. If that isn't effective, you will need to have it flushed by the doctor...
Answered by olympics junkie - Wed Apr 23 18:25:19 2008
Where can I Buy Materials to Make Jewellery to Sell within my Business?
Q. I want to start a jewellery business selling charm bracelets, charms, necklaces and vintage style jewellery. The materials need to be durable as they're to be sold through the internet. Thankyou!
Asked by Liza - Sun Jun 13 12:38:21 2010 - Hobbies & Crafts - 4 Answers - Comments
A. Hi we sell beautiful Handmade Non Tarnish Jump Rings, earwires, Clasps and Eyepins. We have tons of colors and many many sizes. If you are looking for somewhere to start I think we can help. And we have great prices.Come check us out, we would love to help you out. :) Vicki
Answered by - Tue Jun 15 10:16:13 2010
Q. I want to start a jewellery business selling charm bracelets, charms, necklaces and vintage style jewellery. The materials need to be durable as they're to be sold through the internet. Thankyou!
Asked by Liza - Sun Jun 13 12:38:21 2010 - Hobbies & Crafts - 4 Answers - Comments
A. Hi we sell beautiful Handmade Non Tarnish Jump Rings, earwires, Clasps and Eyepins. We have tons of colors and many many sizes. If you are looking for somewhere to start I think we can help. And we have great prices.Come check us out, we would love to help you out. :) Vicki
Answered by - Tue Jun 15 10:16:13 2010
How do I buy materials and things to sell for my business if I don't have any credit?
Q. I need the materials to make the items being sold. But in order to do so you have to have money and/or credit. According to the answer from my previous question, my personal credit line will have to be used to create my business credit line. This can take a very long time and how will I make any money to pay for anything including to rebuild my credit if I don't have any money coming into the business.
Asked by - Mon Jun 7 14:51:19 2010 - Small Business - 2 Answers - Comments
A. You will need to pay cash.
Answered by - Mon Jun 7 15:01:20 2010
Q. I need the materials to make the items being sold. But in order to do so you have to have money and/or credit. According to the answer from my previous question, my personal credit line will have to be used to create my business credit line. This can take a very long time and how will I make any money to pay for anything including to rebuild my credit if I don't have any money coming into the business.
Asked by - Mon Jun 7 14:51:19 2010 - Small Business - 2 Answers - Comments
A. You will need to pay cash.
Answered by - Mon Jun 7 15:01:20 2010
What assets (equipment/materials etc, both current and non-current) would a small home cleaning business have?
Q. So it's a very small business, and I need to find out what assets it would have. So like materials, equipment and stuff like that, for example Van, cleaning chemicals etc. It's a small home cleaning business.
Asked by - Mon Feb 21 06:52:32 2011 - Small Business - 1 Answers - Comments
A. Besides the ones you mention its client list and and existing contract are assets.
Answered by icprofit6000 - Mon Feb 21 20:01:51 2011
Q. So it's a very small business, and I need to find out what assets it would have. So like materials, equipment and stuff like that, for example Van, cleaning chemicals etc. It's a small home cleaning business.
Asked by - Mon Feb 21 06:52:32 2011 - Small Business - 1 Answers - Comments
A. Besides the ones you mention its client list and and existing contract are assets.
Answered by icprofit6000 - Mon Feb 21 20:01:51 2011
Can we use 3m liquid wax once in a couple of months?
Q. I have recently bought 3m liquid wax bottle (The black one available in the indian market, MRP Rs 80) and am satisfied with the results. I have read the complete description on the bottle, however I am still not sure if it contains any abrasives. Could someone suggest how often can I use it? I don't want to use a wax which has mild abrasives because my car is just 3 months old. Thanks in advance.
Asked by - Fri May 14 07:19:35 2010 - Maintenance & Repairs - 4 Answers - Comments
A. If you use your car regularly, you can use liquid wax twice or once a month and its safe. If you seldom use your car, once a month is okay to keep the shines and newest of your car. Hope this help!
Answered by Mikaela P - Fri May 14 08:26:07 2010
Q. I have recently bought 3m liquid wax bottle (The black one available in the indian market, MRP Rs 80) and am satisfied with the results. I have read the complete description on the bottle, however I am still not sure if it contains any abrasives. Could someone suggest how often can I use it? I don't want to use a wax which has mild abrasives because my car is just 3 months old. Thanks in advance.
Asked by - Fri May 14 07:19:35 2010 - Maintenance & Repairs - 4 Answers - Comments
A. If you use your car regularly, you can use liquid wax twice or once a month and its safe. If you seldom use your car, once a month is okay to keep the shines and newest of your car. Hope this help!
Answered by Mikaela P - Fri May 14 08:26:07 2010
How much liquid wax must be pured into a crayon mold if the 1/2 cm radius cylindrical portionis 7 cm long?
Q. If the shape of a crayon can be decribed as a cylinder with a cone sitting on the top, how much liquid wax must be poured into the crayon mold if the 1/2 cm radius cylindrical portion is 7 cm long and the total length of the crayon is 8 cm? Would this answer need to rounded two decimal places?
Asked by marcus e - Sun Oct 26 17:06:11 2008 - Engineering - 1 Answers - Comments
A. cylinder V = pr2h cone volume V = 1 3 pr2h, h is height of cone (not slant) h2 + r2 = s2 cylinder part V = p(0.5)2(7) = 38.48 cm3 cone V = 1 3 pr2h = 1 3 p(0.5)A2(1) = 0.26 cm A3 total = 38.74 cm A3 .
Answered by billrussell42 - Sun Oct 26 18:29:12 2008
Q. If the shape of a crayon can be decribed as a cylinder with a cone sitting on the top, how much liquid wax must be poured into the crayon mold if the 1/2 cm radius cylindrical portion is 7 cm long and the total length of the crayon is 8 cm? Would this answer need to rounded two decimal places?
Asked by marcus e - Sun Oct 26 17:06:11 2008 - Engineering - 1 Answers - Comments
A. cylinder V = pr2h cone volume V = 1 3 pr2h, h is height of cone (not slant) h2 + r2 = s2 cylinder part V = p(0.5)2(7) = 38.48 cm3 cone V = 1 3 pr2h = 1 3 p(0.5)A2(1) = 0.26 cm A3 total = 38.74 cm A3 .
Answered by billrussell42 - Sun Oct 26 18:29:12 2008
What would you like to ask?Where do I get candle making materials such as wax, moulds( wholesale) in Bangalore?
Q. Please let me know where do I get good quality wax, wicks , moulds and other materials for candle making purpose in Bangalore for wholesale price. Thanks in advance.
Asked by S3 - Wed Mar 24 02:37:50 2010 - Small Business - 2 Answers - Comments
A. Check if you can find them listed at sites like www.justdial.com, www.hotfrog.in or
Answered by Shalin - Wed Mar 24 03:35:28 2010
Q. Please let me know where do I get good quality wax, wicks , moulds and other materials for candle making purpose in Bangalore for wholesale price. Thanks in advance.
Asked by S3 - Wed Mar 24 02:37:50 2010 - Small Business - 2 Answers - Comments
A. Check if you can find them listed at sites like www.justdial.com, www.hotfrog.in or
Answered by Shalin - Wed Mar 24 03:35:28 2010
Can someone claim materials for business purposes that was bought before they got a license?
Q. So say a person purchased materials for their business, but did not have a license beforehand...can that person still claim those items? For example, the materials were bought in May but a license was not purchased until July. Between that time, no items were sold. I was just wondering if you needed to purchase materials after getting a license or it doesn't matter, so long it is purchased within the same year. Any help or information is appreciated. Thanks in advance.
Asked by Fetch My Cabbage - Sun Aug 1 08:14:28 2010 - United States - 4 Answers - Comments
A. when you start your business and you have previously purchased items that become inventory, you will show that on your balance sheet as inventory and that will be offset by your "Contribution" if you don't have an inventory and you have the receipts for the purchase, of course you can prove you bought and it was used in the business not sure what you mean by a licence, in some cases the issuance of a license has nothing to do with what you can and cannot claim if this is a professional license that you were unable to perform the jobs prior to getting the license this might affect your income claim
Answered by tro - Sun Aug 1 16:47:11 2010
Q. So say a person purchased materials for their business, but did not have a license beforehand...can that person still claim those items? For example, the materials were bought in May but a license was not purchased until July. Between that time, no items were sold. I was just wondering if you needed to purchase materials after getting a license or it doesn't matter, so long it is purchased within the same year. Any help or information is appreciated. Thanks in advance.
Asked by Fetch My Cabbage - Sun Aug 1 08:14:28 2010 - United States - 4 Answers - Comments
A. when you start your business and you have previously purchased items that become inventory, you will show that on your balance sheet as inventory and that will be offset by your "Contribution" if you don't have an inventory and you have the receipts for the purchase, of course you can prove you bought and it was used in the business not sure what you mean by a licence, in some cases the issuance of a license has nothing to do with what you can and cannot claim if this is a professional license that you were unable to perform the jobs prior to getting the license this might affect your income claim
Answered by tro - Sun Aug 1 16:47:11 2010
How do I get liquid wax off my legs?
Q. I wanted to start waxing my legs... I just put on the wax and tried waxing them but now the wax is stuck to me and I can't get it off. I tried washing, scrubbing, and everything that I could to try to get it off but it's not working. Can anyone help me? I can't get it off?
Asked by Lyn - Fri Jun 8 15:03:58 2007 - Cleaning & Laundry - 1 Answers - Comments
A. There are special lotions they sell ,called as wax off..you can buy them . or as for now as a quick fix you can use a cotton damped with a baby oil or use conditioner...use it liberally then use a cotton damped in water. It should come out.
Answered by niks - Fri Jun 8 16:15:27 2007
Q. I wanted to start waxing my legs... I just put on the wax and tried waxing them but now the wax is stuck to me and I can't get it off. I tried washing, scrubbing, and everything that I could to try to get it off but it's not working. Can anyone help me? I can't get it off?
Asked by Lyn - Fri Jun 8 15:03:58 2007 - Cleaning & Laundry - 1 Answers - Comments
A. There are special lotions they sell ,called as wax off..you can buy them . or as for now as a quick fix you can use a cotton damped with a baby oil or use conditioner...use it liberally then use a cotton damped in water. It should come out.
Answered by niks - Fri Jun 8 16:15:27 2007
What materials would I need for a small business in order to accept a payment by phone?...?
Q. I just need to know...If I was a home based business who took sales over the phone and delivered the materials myself, what type of credit card machine would I need to take a payment over the phone? would I JUST need a credit card machine...or is it more complicated then just needing that??
Asked by RachelLeAnn - Mon Nov 24 16:58:24 2008 - Other - Business & Finance - 2 Answers - Comments
A. Visa or Mastercard would give you a machine like the ones carried by the employees in any Apple Computer Store. You enter the credit info and see if the charge is accepted or declined. You pay 2% of each sale for this privilege. Or you could have money wired to you..
Answered by Ed Atun - Mon Nov 24 22:03:03 2008
Q. I just need to know...If I was a home based business who took sales over the phone and delivered the materials myself, what type of credit card machine would I need to take a payment over the phone? would I JUST need a credit card machine...or is it more complicated then just needing that??
Asked by RachelLeAnn - Mon Nov 24 16:58:24 2008 - Other - Business & Finance - 2 Answers - Comments
A. Visa or Mastercard would give you a machine like the ones carried by the employees in any Apple Computer Store. You enter the credit info and see if the charge is accepted or declined. You pay 2% of each sale for this privilege. Or you could have money wired to you..
Answered by Ed Atun - Mon Nov 24 22:03:03 2008
From Yahoo Answer Search: 'vapor-liquid equilibrium'
Sat Jun 2 14:18:40 2012